LENAR Tractor > Specifications

ENGINE SPECIFICATIONS  
Engine HP 25 Mean
No. of Cylinder / FIP 3 cylinder, with glow plug, inline FIP
Type Water Cooled / Closed System (IDI engine)
Bore ×Stroke(mm) 85/95
Capacity 1.617 litres
Compression Ratio 1.22
Rated RPM 2500
Maxiumum torque at RPM 81Nm at 1875
Backup torque 15%
Air Cleaner Dry type single filter
   
TRANSMISSION SPECIFICATIONS  
Type of mesh Full sychro mesh gear box - range, speed and F-R
No. of speed (4+4)X2(8F + 8R)
Max speed (km/h) 38km/hr
Max reverse speed (km/h) 43km/hr
Type of PTO Live (Independent)
PTO RPM 540/1000 with rear PTO shaft of 6 splines
PTO direction (from back) Clockwise
Gear shifting type Both sides shifting, shuttle lever on left
Clutch 9" asbestos free, two stage clutch
Brakes Dry disk brakes
   
HYDRAULIC SPECIFICATIONS  
Hydraulics type True PC
Lifting capacity 414kg at 24" behind lift point
Hydraulic pump type Parker pump - single pump with priority valve
Pump capacity 9.5gpm (36 L/m) - hydraulic (28 L/m)
Three point linkage CAT - 1, top link sensing, check chain
   
OIL AND COOLANT CAPACITIES  
Fuel tank (l) 30
Cooling system 6.5
Engine oil sump 4.5
Transmission case 22
Hydraulics Trans-hydraulic oil
Front axle case 4
   
OVERALL TRACTOR SPECIFICATIONS  
Type of steering Power steering
Tyre size - type Ag (Std)
Tyre size - front tyre 6.50 x 16
Tyre size - rear tyre 11.2 x 24
Wheelbase (4WD) 1670mm
Wheel track front 1100mm
Wheel track rear 1050mm to 1350mm
Tractor weight (unballasted) 1500kg
Turning radius w/o brake 3.0m